This is the pile of fabrics I got using yesterday's methods for overdyeing. Can't remember right off which one it is!
Well, you could probably use this gradation dyeing method with about any kind of dye but I use it with my Procion MX dyes. It is based on a method that I first learned way back in 1992 at a class taught by Don Wiener at Pro Chem. Elin Noble was supposed to teach the class but she became very ill at this time with what turned out to be a very severe case of Lyme Disease.
Anyway, I do this using low water immersion methods. I usually do an 8 step gradation for the deepest colors (navy, intense blue) and a 6 step for some of the lighter colors (turquoise, basic blue).
May I start by saying that I always look at color two different ways -- one is the actual color itself (blue, blue/green, yellow/orange etc.) and one is the concentration of the color (.05% or 6%). So when doing the gradations, you can pick any color (either a manufactured "pure" color or a mixture of pure colors). For illustration purposes, assume that there will be one yard of fabric weighing about 100 gms in each dyepot (in this case I use gallon sized zip locked bags -- only the good ones which I use over and over again - I like the baggies better than other containers because you can message them so easily).
I make one cup (250 ml about) with 10-12 gms (about 2 tsps) of dye. I then add a cup of water to that to make 2 cups. I arrange the baggies in a tray, each with one cup of water with 1 tbsp of salt (optional). I start with the baggie furthest from me in the tray and add one cup of the two cups of dye. I then fill the 2 cup container back to two cups. I go to the next bag closest to me, put one cup of the new more diluted dye in and then repeat the adding water step. This is repeated through all the baggies. You will have one cup of diluted color at the end. I then put the fabric in each baggie starting from the one closest to me. I message the baggie to make sure the dye gets all through the dry fabric. I smoosh the bags several times during the next 15 minutes. At the end of the 15 minutes, I add a cup of soda ash water to each baggie starting at the front again (lightest to darkest). I message the bag very thoroughly, get as much air out as I can and close the baggie up. I do this for each bag. During the next 15 minutes, I will frequently message the bags but then won't touch them the last 45. If I want more mottling, I will not message as much but I do want to get the soda ash throughout as I hate white spots or pale spots. After an hour, wash out.
A variation on the above that I really enjoy is using one color as a gradation so that you have different intensities in each baggie as above. Instead of using the plain cup of water though, I will make up a second color (say yellow) in a 2% solution and add one cup of this solution to each baggie. You will get a nice gradation that moves from one color through a series of colors sometimes to another color. For those of you who have had Carol Soderlund's class, you kind of get the rows or columns in her book. It is a little tricky to figure out the concentrations of each color but a little arithmetic and you are all set! You will love the results of this one!
Forgive these being un-ironed!! The left side is a gradation of greys using a no longer produced mix from ProChem called Mixing Grey. I have achieved almost the same color using navy blue and orange in a 2:1 ratio. The one on the right hand side is one where I used a navy blue gradation but added a constant 2% solution of a mix of yellow and mixing red.
Placemats for Meals on Wheels and Potholder gifts
14 hours ago